基于CAN总线的某型数字化战车自动测试系统设计

针对现代数字化战车电气与电子系统技术复杂、各分系统关联程度高、维修保障困难等问题,设计了一种基于CAN总线的数字化战车自动测试系统;整体设计基于模块化思想,充分利用车载备用总线,综合运用了DSP+FPGA控制处理技术、AFPN智能故障诊断技术,能够对车载电气与电子系统进行分系统独立测试和全系统联合检测,具有快速故障定位能力和拓扑适应能力;采用适配器与上位机测试软件的分体式设计,实现了平台物理资源复用。应用表明,该系统能够较好的适用于现代数字化战车的维修保障,使用方便,故障诊断快速有效。     

基于LVDT的新型信号调理电路的设计研究

LVDT线性可变差动变压器,其输出信号为两个线圈的差动电压信号,能够实时的、高准确性的将机械位移信号转化成电信号。传统LVDT信号调理电路存在不易散热、检测修复困难、性价比低、适用范围窄等问题,本文设计了一种新型LVDT信号调理电路,该信号调理电路由驱动电路、整流归一化电路和滤波放大电路组成,测试结果能够匹配LVDT的输出信号特性,达到LVDT信号调理的各项指标要求,实验结果表明本设计具有一定的可行性。     

Development of BINOL-Si complexes with large stokes shifts and their application as chemodosimeters for nerve agent

Three fluorescent BINOL-Si complexes (FS1, FS2 and FS3) were rationally designed and synthesized to detect diethyl chlorophosphate (DCP), a mimic of lethal nerve agents. These three fluorescent probes showed green, yellow and orange fluorescence, respectively. Moreover, the series of fluorescent probes has the characteristics of fast response time (≤ 4 s), low detection limit (0.0097 μmol/L), high sensitivity and naked eye detection. More important, a fiber optic sensor capable of detecting DCP vapor in real time was also prepared for the first time, the lowest detection limits (down to 4.4 ppb) were all lower than that of the IDLH (immediately dangerous to life or health) concentration of Sarin (7.0 ppb).     

Thermal stability and dynamic mechanical thermal analysis of epoxy thermosets possessing N,N′-disubstituted pyromellitimide units

Abstract

In this work, three epoxy resins including diglycidyl ethers of N,N′-bis(2-hydroxyethyl)pyromellitimide (DIDGE), bisphenol-A (BADGE), and polyethylene glycol (PEDGE) were isothermally cured by an amine curing agent possessing N,N′-disubstituted pyromellitimide units (denoted by DIDAM). DIDGE resin was synthesized from the reaction of N,N′-bis(2-hydroxyethyl)pyromellitimide with an excess of epichlorohydrin. Also, DIDAM curing agent was prepared from the reaction of pyromellitic dianhydride with an excess of ethylene diamine. Completion of the isothermal curing processes was approved by both Fourier transform-infrared spectroscopy and non-isothermal differential scanning calorimetry (DSC). The DSC traces showed only the phase transitions related to the thermal degradation of the resulting thermosets. According to the thermogravimetric analyses, the DIDGE/DIDAM thermoset showed higher thermal stability at temperatures above 425?°C than the other two thermosets. While BADGE/DIDAM and PEDGE/DIDAM thermosets showed about 70% weight loss in the thermal range of 400–850?°C, DIDGE/DIDAM thermoset was encountered with only about 40% weight loss. The glass transition temperatures (T_g ) of the resulting thermosets were determined using tan δ vs temperature plots obtained from dynamic mechanical thermal analysis. The T_g values of BADGE/DIDAM, DIDGE/DIDAM, and PEDGE/DIDAM thermosets were found to be 211?°C, 189?°C, and 81?°C, respectively.     

Impact of titanate coupling agent on properties of high density polyethylene composite filled with coal gangue

In this study, surface modification of coal gangue (CG) was performed with titanate coupling agent 201 (isopropyl tri(dioctylpyrophosphate) titanate), and the effects of surface modifier on mechanical properties and thermal stability of high-density polyethylene filled with CG (HDPE/CG) and high-density polyethylene filled with modified CG (HDPE/mCG) composites were investigated. The coupling agent was successfully grafted on CG surface through chemical reaction according to the analyses of Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), and the coupling agent can effectively enhance the hydrophobicity of surface that was verified by water contact angle beyond 90° of modified CG sample. With the introduction of coupling agent, some enhancements of tensile strength, flexural strength, and impact strength were observed in HDPE/mCG compared with HDPE/CG, due to the improved compatibility between mCG fillers and matrix. The increased storage modulus and decreased loss factor of HDPE/mCG composite further confirm the stronger interface adhesion after modification. Moreover, it is found that titanate coupling agent 201 can improve the thermal stability of HDPE/mCG composite to some extent.     

Achieving highly crystalline rate and crystallinity in Poly(l-lactide) via in-situ melting reaction with diisocyanate and benzohydrazine to form nucleating agents

The drawback of the application for poly(_l-lactide) (PLLA) is the low crystalline rate and crystallinity obtaining via normal processing methods. Modifying crystallization of PLLA has been found to be an efficient way to improve its mechanical and heat resistance properties. In this wok, 4, 4′-diphenylmethane diisocyanate (M) and benzohydrazine (P) were employed into PLLA melt to in-situ form nucleating agents. The in-situ melting reaction was confirmed by a nuclear magnetic resonance spectroscopy. The crystallization behavior and crystalline morphology were investigated by a differential scanning calorimetry, a polarized optical microscopy and a field emission scanning electron microscope. The crystalline rate of PLLA was abruptly enhanced by adding (M+P) and melting reaction with PLLA. The crystallization half-time of PLLA dramatically decreased from 42.0 to 1.1 min at 130 °C by the in-situ formation of nucleating agents. The crystallinity of PLLA increased from 10.3 to 42.1 by adding 0.25% (M+P) and melting reaction for 8 min. Furthermore, the size of PLLA crystals was dramatically reduced because of the nucleating effect. Accompanied with improvement on crystallinity, the Vicat softening temperature of PLLA shifted from 57.4 °C to 93.7 °C by the in-situ reaction with 6.00% (M+P), and indicating heat resistance enhancement.     

Exploring the Limits of Transition-Metal Fluorination at High Pressures

Fluorination is a proven method for challenging the limits of chemistry, both structurally and electronically. Here we explore computationally how pressures below 300 GPa affect the fluorination of several transition metals. A plethora of new structural phases are predicted along with the possibility for synthesizing four unobserved compounds: TcF₇, CdF₃, OsF₈, and IrF₈. The Ir and Os octaflourides are both predicted to be stable as quasi-molecular phases with an unusual cubic ligand coordination, and both compounds formally correspond to a high oxidation state of +8. Electronic-structure analysis reveals that otherwise unoccupied 6p levels are brought down in energy by the combined effects of pressure and a strong ligand field. The valence expansion of Os and Ir enables ligand-to-metal F 2p→M 6p charge transfer that strengthens M−F bonds and decreases the overall bond polarity. The lower stability of IrF₈, and the instability of PtF₈ and several other compounds below 300 GPa, is explained by the occupation of M−F antibonding orbitals in octafluorides with a metal-valence-electron count exceeding 8.     

聚吡咯及其纳米复合材料在光热治疗领域的应用

光热治疗是近年来兴起的一种治疗方法,具有靶向性强、适应性广的特点。在光热治疗中,通过光热剂对光的吸收将光能转化为热能,从而实现治疗作用,因而光热剂的光热转化性能直接决定了光热治疗的效果。光热剂的种类丰富,涵盖由无机到有机等组成和性能各异的多种材料。其中,聚吡咯具备良好的生物相容性、优异的光稳定性以及光热转化性能,在光热治疗领域受到广泛关注,是一种拥有巨大应用潜力的光热剂,然而其在光热治疗领域的发展趋势及前景却鲜有报道。本文综述了聚吡咯及其纳米复合材料的制备方法,详述了聚吡咯及其纳米复合材料在光热治疗领域中的应用情况,包括聚吡咯基纳米材料的自身性能和实际光热治疗的效果,指出以聚吡咯为基体或修饰材料来制备具有CT、磁共振、光声显影及光热治疗性能的聚吡咯基复合材料已成为发展趋势。在此基础上,本文还总结了聚吡咯基纳米复合材料在制备和应用中存在的问题,并分析了其在发展过程中遇到的挑战以及在生物医学应用中的前景。     

Effects of a novel ultrasound contrast agent with long persistence on right ventricular pressure: Comparison with SonoVue

This work investigated the effect of infusion of a self-made ultrasound contrast agent with long persistence (named ZHIFUXIAN) on rat right ventricular pressure and made a preliminary evaluation on the relative safety of the novel microbubbles. Normal saline, SonoVue and ZHIFUXIAN were injected through caudal vein at the total volume of 0.5 ml for each injection. The right ventricular systolic pressure (RVSP) and end-diastolic pressure (RVEDP) were monitored and the changes of the pressure were compared with baseline readings. RVSP increased when saline, SonoVue or ZHIFUXIAN were injected, the greatest change being after SonoVue (about 2 mm Hg), but there was no statistical significance compared with baseline (P > 0.05). There was no significant difference in RVSP between saline, SonoVue and ZHIFUXIAN at any time point. Also, there was no significant difference in RVEDP between groups at each time point and between different time points in each group. The results indicate that the self-made microbubbles effect on right ventricular hemodynamics is equivalent to that of normal saline at the same volume needed for effective enhanced imaging, demonstrating that it does not produce changes in right ventricular blood pressure under the study conditions. Pathological examination also showed it had no obvious influence on lung, liver and kidney.     

Superhydrophilic porous TiO2 film prepared by phase separation through two stabilizers

A novel method was developed to produce a TiO₂ film with circular pores on its surface. The pores aroused from the precursor solution using both acetylacetone (AcAc) and diethanolamine (DEA) as stabilizers. The appearance of interconnected or isolated pores for the films was discussed in relation to the phase separation in the sol-gel process with the presence of Acac and DEA. Macropore size, together with connectivity of pores and gel skeleton, can be controlled by selecting an appropriate composition for preparation at DEA amount or regulating a time scale of the sol-gel transition. Finally, wetting behavior of the resulting films was characterized by using contact angle measurements. The TiO₂ films with interconnected or relatively isolated pores exhibit superhydrophilic characteristic, although it is not exposed to ultraviolet irradiation. Deducing from the Wenzel-Cassie regimes’ transition criterion, the existence of Cassie impregnating wetting regime rather than Wenzel one upon these porosity-driven superhydrophilic surfaces can be obtained.